Towertalk
[Top] [All Lists]

Re: [TowerTalk] Cable Pulls

To: "Tower and HF antenna construction topics." <towertalk@contesting.com>
Subject: Re: [TowerTalk] Cable Pulls
From: yetiguy@earthlink.net
Reply-to: yetiguy@earthlink.net, "Tower and HF antenna construction topics." <towertalk@contesting.com>
Date: Sat, 27 Mar 2010 12:43:09 -0400 (EDT)
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Hey, Jerry,

Electricians - who do this all the time  - ALWAYS pull them together when they 
can. This avoids the ADDED friction of each new cable against all the other 
cables in the conduit.

You can roll all the cables out, forming a long, untwisted bundle, and aligning 
it with the conduit. Tape the pull rope connection to the bundle to form a 
smooth arrow-head-like transition, so it won't hang up on a coupling (NO 
LUMPS). If the connectors are already installed, stagger them so no large lumps 
are formed. Be sure that no tension in pulling is applied to your connectors by 
taping the cables to each other near the ends before a final tape wrap over the 
entire transition.

Then, keep the bundle aligned with the conduit as you pull cables through (a 
second person can help here).  Use "yellow Stuff" lubricant (or equal) along 
the entire bundle if you have any doubts about friction. And, simultaneously, 
pull another "haul line" with the wires, just in case. Leave it in the conduit. 
Force a couple of Brillo pads around the cables at each end to keep vermin out. 

73, 
Dennis
K6IFB


-----Original Message-----
>From: Jerry <grf@uneedspeed.net>
>Sent: Mar 27, 2010 12:21 PM
>To: Tower Talk <towertalk@contesting.com>
>Subject: [TowerTalk] Cable Pulls
>
>Hi All:
>Yesterday I pulled all my cables out of the 4 inch underground pipe (100 
>ft) out to the tower after suspecting the critters had gotten to some of 
>the cable (shows me the importance of plugging up the pipe!).  Actually 
>found a dead critter along with several chewed up cables.  So, I must 
>replace the hf and vhf lines as well as the switching/rotor cables.
>
>My question is:  in order to minimize the cables twisting together, do I 
>pull one cable at a time or all together?  The local guru's say to pull 
>them together all at once.  Somehow I feel the one at a time would 
>minimize the "twisting together".  Anyone have any ideas or suggestions?
>
>Tnx and 73
>Jerry France
>K7LY
>Lake Havasu City,AZ
>_______________________________________________
>
>
>
>_______________________________________________
>TowerTalk mailing list
>TowerTalk@contesting.com
>http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>