Towertalk
[Top] [All Lists]

Re: [TowerTalk] Wire for Radials

To: "Jerry Keller" <k3bz@arrl.net>
Subject: Re: [TowerTalk] Wire for Radials
From: "Rick Karlquist" <richard@karlquist.com>
Reply-to: richard@karlquist.com
Date: Wed, 12 May 2004 14:39:03 -0700 (PDT)
List-post: <mailto:towertalk@contesting.com>
I have about 15 miles of hookup wire rolled out on the ground.
What you have is similar but not insulated.  Someday, it
may corrode away, but that's hard to predict.
It will handle full legal power.  It's flimsy mechanically,
of course, which means it could get broken or cut by the lawn
mower occasionally.  OTOH, it won't harm the mower if you do
cut it.  With 12 gauge wire, the mower may not just slice through
it and keep running.

The RF resistance of your wire is around 1/10 ohm per foot
on the low bands.  12 gauge would have 1/4 as much resistance
by comparison.

Rick N6RK


Jerry Keller said:
> I've come into possession of a spool of several thousand feet of solid #24
> bare copper wire. Can I use it for radials? What power level could I run
> with it?
> 73,  Jerry K3BZ
> _______________________________________________
>
> See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
> Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with
> any questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>

_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>