Larry
the K7NV Green Heron controler for Prop pitch works great with the correct
modifications in the PP.
Smoot start and stop.
Great product.
Larry stowell <lclarks@nc.rr.com> wrote:
I wonder if this would be a good application for the Green Heron controller.
The new one with its
software setup is so smooth. I'm using it on an aluminum crank-p with a Yaesu
2800 and it hardly
moves the tower starting or stopping.
Larry K1ZW
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of Hardy
Landskov
Sent: Tuesday, February 05, 2008 5:03 PM
To: Rob Frohne; towertalk
Subject: Re: [TowerTalk] Is there a decent way to fit a prop pitch in Rohn
25tower?
What I would be afraid of is the Rohn 25 top section failing after a period of
time because of the
tower section twisting that will occur each time you start the prop pitch. I
have about 22 sq ft on
AB105 which is 24+ inches on a side and the starting torque and resulting tower
twist is
significant. I did not realize it but I was on the tower one time and had
someone in the
shack turn the antenna! I have the top set of guys 10 feet below the top
of the tower so I can tram antennas up and down.
Maybe someone can chime in and set us straight on this because I have been
turning this antenna for
about 20 years.
GL N7RT
At 02:52 PM 2/5/2008 -0800, Rob Frohne wrote:
>Hi,
>
>I am having difficulty finding 100 feet of Rohn 45 or larger tower in
>the neighborhood of Walla Walla, Washington, but I can find heaps of
>Rohn 25 tower. I am considering putting a shorty 40 and a 4 element
>Steppir on top. The wind loading specs of 25G and 45G are not that
>different if you believe Rohn. The big thing is that I would like to
>use my prop pitch to turn the antennas, and I'm afraid I can't fit it.
>There are three top sections available for Rohn 25G.
>
>http://www.criticaltowers.com/ROHN%20Industries/Media/pdfs/25G/25G-11.p
>df
>
>My prop pitch is the small size one I believe like those in this photo
>without the mast adapter:
>
>http://www.k7nv.com/proppitch/09a902c0.jpg
>
>Is there a way to fit this into a Rohn 25 tower so I can also remove it
>for maintenance without disassembling the tower. I do have access to a
>25AG1 section of Rohn 25 tower, but it is at 90 feet in the air, and I
>don't really feel like wrestling this thing up there and fiddling with
>it at that height just to find out if it will work when I'm sure
>someone must have already done it on the ground.
>
>Thanks & 73,
>
>Rob, KL7NA
>
>_______________________________________________
>
>
>
>_______________________________________________
>TowerTalk mailing list
>TowerTalk@contesting.com
>http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
Hector Garcia XE2K / XF1K
Mexicali B.C DM22fp
P.O.Box 73
El Centro CA 92244-0073
USA
http://www.xe2k.net
http://www.dxxe.org
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|
