Hello All,
I have 175' of Rohn 45 and 150' of Rohn 55 which I will be putting up
later this Summer. I can change the Rohn 45 amount with additional
purchase, and can do same for the Rohn 55. I will start on my radio cabin
in October.
My antenna plans, subject to inputs from the sages out there, are, as
follows:
3 TOWERS, MAXIMUM....................
I will have rotatable and switched tri-band stacks on one tower (3 bay
array, switched), with a 6 meter antenna at the top of that tower. I am
thinking the tower to be Rohn 45 at 100'. Rotors will be Tail Twisters.
What side elevations should the tri-banders be mounted?
Monobanders, stacked and switched on another tower for 20 and 15, with a
2 meter antenna at the top of that tower. I am thinking the tower to be
100'. What elevation should these antennas be, and how many should be be
mounted? I am still thinking Tail Twisters for the rotors; top and side.
Perhaps the side 20's should be fixed. Perhaps, given the tri-band
stacks, side mounted 20's and side mounted 15's are not needed.
Monobanders, stacked and switched for 10 and (shortened element) 40 on
another tower. I am thinking on the Rohn 55 at 150' for this tower. The
top stack will turn via prop pitch. The side 40's will be fixed. The side
mounted 10's could turn via Tail Twisters. What elevation should these
antennas be, and how many should be be mounted?
Inverted L's for 80 and 160, with slopers also for those bands, as well
as listening beverages.
Any thoughts (silly me) on elevations for the stacks and various tower
heights to consider? I am 51 years old, and do not want to create a
repair monster situation that grows too fast beyond my ability to
maintain with time.
I would like to keep booms on all antennas under 40', and do not plan on
putting towers up as high as possible just for the sake of erroniously
thinking that there is any chance of being a DX contest winner from South
Texas.
I would like to, and will, of course, be loud to the DX, but I want to
optimize my installation for stateside contest propogation, and a
minimization of maintenance.
The tower elevations and stack combinations are not fixed in my mind at
this point. Who has thoughts on antenna stacking heights and tower
heights?
The operating cabin design and cerveza refrigerator size is another
design matter all together, best left to my brew buds and my interior
designing wife !
Should you reply via the reflector, please ALSO reply by copy to BOTH of
my e-mail addresses listed below.
73,
Bob
N5RP
Bob Perring
Houston, Texas
tele: (281) 493-5780
fax: (281) 493-5780
Std e-mail: perring@texas.net
Int'l e-mail: N5RP@compuserve.com (when traveling)
<underline><color><param>0000,0000,ffff</param>http://perring.home.texas.net</color></underline>
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|