Towertalk
[Top] [All Lists]

[TowerTalk] Antenna analyzer overload from BC

To: <towertalk@contesting.com>
Subject: [TowerTalk] Antenna analyzer overload from BC
From: n4zr@contesting.com (Pete Smith)
Date: Sat, 05 Jan 2002 17:06:19 -0500
Yesterday I tried to use a borrowed MFJ 259B to tune the omega match for my
160m shunt fed tower.  Readings were all over the map, followed no logical
pattern, and would jump dramatically from time to time -- an R of 24 would
suddenly go to >600, for example.  

By pure dumb luck I managed to get the match set up almost perfectly -- SWR
1:1 at 1830 -- but I'm intrigued.  The nearest AM broadcast station is ~5
miles away and runs only 500 watts on 1550 kHz.  It pins the s-meter on my
Mark 5, barely -- 6 dB of attenuator takes the meter off the pin.  Could
that possibly be enough power delivered to the antenna analyzer to make it
behave erratically?

73, Pete N4ZR

The revised World Contest 
Station Database
is online at www.pvrc.org





________________________________________________________________________
This list is sponsored by the new eHam.net Store.  When you buy products
like ICE filters, Array Solutions StackMatch, or M-Squared Antennas from
the eHam Store for the same price you pay direct, a portion of the sale
price goes to support this list.  Check it out at http://www.eham.net.

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com


<Prev in Thread] Current Thread [Next in Thread>