AA4NC@aol.com wrote:
>
> I need to replace the bolts in a 25G tower. I need to find a better type of
> bolt, that won't rust so quickly. The Rohn tower doesn't mention what type of
> bolts to use. Since the stock Rohn bolts didn't last too long, I was thinking
> about stainless. Is there a problem with this? What is the correct size?
>
> Thanks / Happy holidays,
>
> Will
>
> --
> FAQ on WWW: http://www.contesting.com/towertalkfaq.html
> Submissions: towertalk@contesting.com
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: K7LXC@contesting.com
> Sponsored by Akorn Access, Inc & KM9P
Will, don't use stainless steel. They have a tendency to bind/gall and
will be very difficult to replace if you need to.
Buckmaster says you're in North Carolina. If you're near the coastline,
the salt air might be the culprit. I'd stick with galvanized steel
bolts/nuts/lockwashers and replace them periodically/as necessary. Of
course, use the strength bolt recommended by ROHN.
Bill, N3RR
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: K7LXC@contesting.com
Sponsored by Akorn Access, Inc & KM9P
|