if you do find something please let us all know - I'm not aware of anything
that is available to rent for this purpose.
Gary
K9RX
-----Original Message-----
From: w5prchuck@gmail.com
Sent: Tuesday, March 7, 2017 8:35 AM
To: Herb Krumich via TowerTalk
Subject: Re: [TowerTalk] radials 160
There is a machine similar to an edger that electricians use to cut the
trench and insert the wire all in one pass. I think you can rent them.
Maybe even at Home Depot. Might be worth buying one…
Chuck W5PR
Sent from Mail for Windows 10
From: Herb Krumich via TowerTalk
Sent: Monday, March 6, 2017 5:33 PM
To: towertalk@contesting.com
Subject: [TowerTalk] radials 160
All winter I have been clearing out a large area to put radials down for a
160 meter antennaI built an antenna which looks like a T between two 90 foot
towersThe vertical leg is 65 feet and the horizontal is the same.
I used it with only a few radials and was pleased with contacts to the west
coast from Pa.So here is my questionWhat type of tool can I use to bury the
radials an inch or so.My problem is there are quite a few surface rocks that
I will have to deal with.Does Home Depot or Lowe's have something ?I was
even just thinking about using a pic and draging it backwards
Preferable no motors due to the rocksThanksHerb K2LNS
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|