All the specs and part numbers for construction of Rohn towers can
be found at this web page
"http://www.rohnnet.com/_vti_bin/shtml.exe/search.htm";
HAVE FUN,
dave
==================
K7LXC@aol.com wrote:
> In a message dated 99-04-30 21:39:11 EDT, n8gan@direcpc.com writes:
>
> > 60' of Rohn 45G will almost stand up by itself, so no overkill necessary.
>
> WARNING - it's not even "almost". DO NOT install or climb 60 feet of
> freestanding 45G. Factory specs allow 2.3 square feet @ 70 MPH
> self-supporting at 45 feet. That's the factory height limit. Self-supporting
> at 90 MPH, the limit is 35 feet at 1.9 square feet.
>
> More information is available from the Rohn pamphlet "Manufacturer's
> Technical Information for Bracketed or Self-Supporting Towers". It's
> available free from http://www.championradio.com.
>
> Cheers, Steve K7LXC
>
> --
> FAQ on WWW: http://www.contesting.com/towertalkfaq.html
> Submissions: towertalk@contesting.com
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: owner-towertalk@contesting.com
> Search: http://www.contesting.com/km9p/search.htm
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|