Hi Dale,
Saw your post on the TT about the Molex plugs for rotor cable. I'm in
the process of putting a feedthru panel in the new shack and I'm looking
for a source for a double female bulkhead style plug. Any sources would
be greatly appreciated!
TIA,
Jeff - WB5YWI
"Dale L. Martin" wrote:
> Absolutely.
>
> I put a Molex connector on a three foot long cable from the
> rotator box which connects to the molex connector on the 50'
> cable run to the garage antenna patch panel, where it meets yet
> another set of connectors, then out and up the tower to the Amp
> connector at the rotator. I have another molex connect on a
> jumper with the AMP connector which mates with the rotator Amp
> connector. When the rotator is down for whatever reason
> (fortunately, not frequently), it's checked out with the control
> box before it goes back up.
>
> 73,
> dale, kg5u
>
> >
> >I've got just one tip.
> >Whenever I do Rotor maintenance I test it on the bench before
> taking it up
> >the tower!
> >
> >
>
> --
> FAQ on WWW: http://www.contesting.com/towertalkfaq.html
> Submissions: towertalk@contesting.com
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: owner-towertalk@contesting.com
> Search: http://www.contesting.com/km9p/search.htm
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|