Towertalk
[Top] [All Lists]

Re: [TowerTalk] Homemade tower base for HG-70HD

To: "Jim Lux" <jimlux@earthlink.net>, towertalk@contesting.com
Subject: Re: [TowerTalk] Homemade tower base for HG-70HD
From: "KA9OFM John Garrett" <ka9ofm@gmail.com>
Date: Tue, 25 Jul 2006 11:18:10 -0500
List-post: <mailto:towertalk@contesting.com>
the PDF for your tower is located at
http://www.hy-gain.com/man/pdf/HG-70HD.pdf

John KA9OFM


On 7/25/06, Jim Lux <jimlux@earthlink.net> wrote:
>
> At 10:13 PM 7/24/2006, Allen R. Brier wrote:
> >I bought a used Hy-Gain HG-70HD tower. The guy I bought it from built a
> >homemade rebar base for it. I would like to get some guidance from the
> group
> >on the following issues:
> >
> >
> >
> >1.      Size of rebar: I need to convert the diameter to rebar "size"
> >(gauge)(?).
>
> rebar # is 1/8ths of an inch, #4 is a half an inch in diameter (nominal)
>
> More on rebar at: http://www.sizes.com/materls/rebar.htm
>
> >2.      Welding: The rebar cage has been welded, not wired together.
>
> Could be good, could be bad. Depends on the material in the bars and how
> it
> was welded.
>
> >3.      Rust: The rebar cage is quite rusted. I assume that I will need
> to
> >clean the rust to achieve good contact with the concrete.
> >4.      Design: Does anybody have the design for the HG-70HD base? Of
> >course, I can probably use a base for a similar size tower as a go-by.
>
> Is there a manufacturer recommendation? Check the Hygain website and
> download the manual.
>
> >I would appreciate any input I could get to determine if this FREE base
> is
> >good enough, or should I purchase a new one from Hy-Gain for $349(?) I
> will
> >be happy to photograph this base and send it to anyone nice enough to
> >evaluate it. I want to make sure the tower stays up in the worst on
> >conditions. I know the base is a critical part of that and I just want to
> >make sure it is ok.
>
> You're in an interesting situation.. You could spend $350 and *know* that
> it's the right one, or you can spend nothing and gamble that it's the
> right
> one, that it was properly assembled, etc.  What fraction of the overall
> project cost is the $350?  Do you have any permitting requirements?  What
> are the consequences of it falling down?
>
> Jim, W6RMK
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>