> mph. Most urban areas are built in low wind locations. The problem
> arises when the average wind is high with day after day of winds over
> 30 mph. We have had people make statements that Force 12 elements
My location is middle western Georgia, although my antennas are
in a clear area and above the tree lines. It is the mild breezes that
set my antennas elements into vibration.
> don't vibrate and therefore don't need rope in them or will not fail
> from wind induced vibration. I know this is false because if you take
> an element and swing it around you will hear and feel the vibration
> from the element.
I know it is false because on any day when the breeze is over
maybe ten MPH, I can hear the antenna elements vibrating. Since
the antennas are 30 feet or more apart, there is no mistaking (when
on the tower) which antennas vibrate.
It seems silly to have a disagreement about this, because adding
rope INSIDE the element can't possibly change the ice loading or
wind loading of the element. It might not do any good, but it
certainly can't do any harm to the antenna.
>From here on out, I'll never install another antenna without rope
dampers and end caps. I've learned my lesson.
73, Tom W8JI
W8JI@contesting.com
--
List Sponsor: ChampionRadio.com - Trylon self-supporting towers, safety
equipment, rigging gear, LOOS tension guages & more! www.championradio.com
--
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|