Towertalk
[Top] [All Lists]

[TowerTalk] Tower project

To: <towertalk@contesting.com>
Subject: [TowerTalk] Tower project
From: "Gene Fuller" <w2lu@rochester.rr.com>
Date: Wed, 18 Jan 2012 01:37:16 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Hi Doug -

Your twin towers sounded a bit familiar. Digging back in my "swamp"  I came up 
with a two page "Collins "Product Description and Application" from the mid 
1960's which describes their Model 237B-4 Rotatable  Unidirectional HF Antenna 
(Collins part number 522-1536-025).This includes two 80 foot towers, four guy 
cables, a 90 foot mast with split bearing at the top and motor, gear reducer 
and rotary joint  at the base, and a 6.5-30 "Megacycle" LP - 12 full sized 
elements (longest is 80 feet) on a 61 foot boom. Antenna is hinged on the mast 
and mast hinged at the rotator at the base of the tower. All designed for 120 
mph wind or 80 mph with 1/4" on ice. 

I was working for General Dynamic / Electronics Division here in Rochester (NY) 
at the time and was Project Engineer for the HF communications system antennas 
for the Apollo mission tracking ships which required several 7-30 MHz LP's, so 
I interviewed and collected data from a number of sources. I also found a spec 
sheet from Antenna Products Corp, much less detail of interest except that they 
also offered both 6.5-30 LP and a 4-30 MHz LP with a 116 foot boom and longest 
element of 123 feet, also with twin 80 foot towers. We purchased the antennas 
from a relatively small company down near Boston (CHU Associates) who did a 
really nice job of design and manufacture of those and some for another 
requirement. I did also talk with and get a quote from Hy-gain but didn't see 
any info on their twin tower setup. 

Sorry I don't have any specific tower installation instructions, but with the 
model and part number you might be able to dig something up. It sure looks like 
you should have a real good tower if you can figure out how to safely erect it. 
Collins did offer a winch type erection kit for the mast and antenna but that 
was only for after the tower was in place.

Good luck with the project !

73's,   Gene / W2LU

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>
  • [TowerTalk] Tower project, Gene Fuller <=