To: | Mack McLaughlin <k4mir@comcast.net>, Towertalk<towertalk@contesting.com> |
---|---|
Subject: | Re: [TowerTalk] Grounding a bracketed tower |
From: | Red <RedHaines@centurytel.net> |
Date: | Mon, 01 Sep 2003 09:41:21 -0500 |
List-post: | <mailto:towertalk@contesting.com> |
Hi, Mark; Good information is available in PolyPhaser's book and in the application notes from ICE. For a tower not at the corner of your building fan out at least five radials counting two that are part of a building perimeter or part of a perimeter. Use more if at a corner. Connect the ground system to the utility grounds, usually as part of the building perimeter. Distribute radials among the three tower legs, to reduce inductive impedance. Connect to the tower legs in a manner that prevents rapid corrosion; never put copper against galvanize. Space ground rods on each radial at or a bit less than twice their depth. Make each radial at least four times the ground rod depth. Use CadWeld connections or plan to inspect, clean, add anti-corrosion compound and tighten clamp connections a couple times each year. The objective is to minimize peak voltage at the interface with the in-house system by providing multiple low impedance paths to as much volume of earth as is possible (earth is a lossy capacitor, not a very good conductor), while keeping the whole in-house system at nearly the same potential. The high voltage transmission line doesn't hurt the bird on a single wire! 73 de WOØW Mack McLaughlin wrote: I have a bracketed 25G tower and need to install a ground system. I _______________________________________________ See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA. _______________________________________________ TowerTalk mailing list TowerTalk@contesting.com http://lists.contesting.com/mailman/listinfo/towertalk |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: [TowerTalk] Grounding a bracketed tower, Randy Wing |
---|---|
Next by Date: | [TowerTalk] What's up?, David Cook |
Previous by Thread: | Re: [TowerTalk] Grounding a bracketed tower, Randy Wing |
Next by Thread: | RE: [TowerTalk] Grounding a bracketed tower, Steven Gehring |
Indexes: | [Date] [Thread] [Top] [All Lists] |