Re: [TowerTalk] Coax Resiliency

[Red <RedHaines@centurytel.net>]

The line loss is one of the characteristics that may be degraded by 
moisture intrusion or other degradation of coax.  It is easily measured 
by measuring impedance of the coax with one end either shorted or open.  
If open, the nulls appear at odd multiples of the 1/4 wavelength of the 
line.  If shorted, the nulls appear at multiples of the 1/2 wavelength.

As frequency is varied, note the minimum Z at the nulls.  The cable loss 
at that frequency, in dB,  is equal to 8.69 x minimum Z/ line impedance. 

For 50 ohm line, the loss is 0.17 x minimum Z. 

For example, if you measure a 4 ohm minimum Z with 50 ohm line, the loss 
is 0.68 dB.

The loss thus calculated is for a line terminated in the line impedance, 
SWR = 1.

This information is taken from the instruction manual for the Autek VA1 
antenna analyst.  I use this method of measurement to assess 
deterioration of my transmission lines.  I also measure DC insulation 
resistance and DC conductivity of the conductors.  I'm reluctant to use 
a Megger.  Exceeding the breakdown voltage of a line can permanently 
damage it, depending upon the kind of insulation that breaks down.

73 de WOØW


_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk