Towertalk
[Top] [All Lists]

Re: [TowerTalk] Taping wires to flat member towers

To: atoothaker@copper.net
Subject: Re: [TowerTalk] Taping wires to flat member towers
From: RCM <robrk@nidhog.net>
Date: Wed, 08 Dec 2004 16:45:32 -0500
List-post: <mailto:towertalk@contesting.com>
That's what old garden hose is made for........

atoothaker@copper.net wrote:

The usual coax hangers are not sized for RG8, etc. Usually start at


1/2" amd go up.
Al


---- Original Message ----
From: robrk@nidhog.net
To: Subject: Re: [TowerTalk] Taping wires to flat member towers
Date: Wed, 08 Dec 2004 10:09:18 -0500




Andrews coax hangers.....
http://www.andrew.com/catalog38/Results.aspx?SearchType=1&KeyWord=ha


ngers&KeyWordSearchMethod=BEGINWITH&CatalogSectionID=10


Jim Lux wrote:



Thomas &Betts, Panduit, AMP, and so forth make an assortment of


products to


attach round cables to flat surfaces. The most common one you've


probably


seen is the little square thing with an adhesive base and a slot to


stick a


nylon cable tie through on the top. However, there's probably


dozens of


versions of these. In particular, they make ones designed to hold


cables


that aren't supposed to be crushed (like coax), and they make the


cable ties


that are designed for outdoor use (the usual white nylon ones tend


to


degrade in sunlight).

A bit more expensive than a roll of tape, but might work better.
Particularly the products designed for outdoor use, which will have


sealed


edges and adhesives that really grip well. For that matter, they


have the


bases with screw holes that you could spend a few days on your


tower with a


drill and tap and really anchor the stuff.

T&B's trade name is "Ty-rap" so if you search for that you'll


probably turn


up their catalog. You can try the following URL, but no guarantees


that it


will actually work:
http://elec-cat.tnb.com/tnbcat/tnbcat/TYR_home_page_dsp.build_catal


og_home_p


age

----- Original Message -----
From: "Juan M. Chazarra EA5RS" <ea5rs@ono.com>
To: <towertalk@contesting.com>
Sent: Wednesday, December 08, 2004 5:04 AM
Subject: [TowerTalk] Taping wires to flat member towers






Adhesive tape tapes coax just fine to round member towers, but I


am


having a hard time taping coax, rotor cable, etc to the members of


my


tower which are all flat. Any ideas?

Thanks,
Juan EA5RS




_______________________________________________

See: http://www.mscomputer.com for "Self Supporting Towers",


"Wireless Weather Stations", and lot's more. Call Toll Free,
1-800-333-9041 with any questions and ask for Sherman, W2FLA.


_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk






_______________________________________________

See: http://www.mscomputer.com for "Self Supporting Towers",


"Wireless Weather Stations", and lot's more. Call Toll Free,
1-800-333-9041 with any questions and ask for Sherman, W2FLA.


_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk









_______________________________________________


See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>