Towertalk
[Top] [All Lists]

Re: [TowerTalk] Mounting 4 square verticals

To: douglas.snowden@med.va.gov, towertalk <towertalk@contesting.com>
Subject: Re: [TowerTalk] Mounting 4 square verticals
From: Don Havlicek <n8de@thepoint.net>
Reply-to: n8de@thepoint.net
Date: Tue, 24 May 2005 16:09:43 -0400
List-post: <mailto:towertalk@contesting.com>
Insulation is inexpensive, as the bottom of a 1/4-wave vertical is a low 
voltage point.
You can use sheet teflon between the irrigation tubing [which I think is 
overkill for a 40m vertical] and the support.
Don
N8DE

douglas.snowden@med.va.gov wrote:
> I am going to be making a trip to the irrigation tubing supplier in a couple
> of
> days. Plan on buying several pieces for a 40m 4 square.  I don't have the
> ambition
> for a 80m 4 square yet.  My question is:  If I put the pipe on 4X4 pressure
> treated 
> posts, do I need to worry about insulating them?  I would guess I would have
> them 
> a foot off the ground.  Or if I elevated them 6 ft or so would that make a
> difference?
> 
> I have put verticals up in the past, and was ignorant of any path to ground
> though the
> wood I used. I see on the "net" a few pictures of insulated 80 verticals. 
> 
> 
> Doug N4IJ
> 
> 
> _______________________________________________
> 
> See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless 
> Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any 
> questions and ask for Sherman, W2FLA.
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
> 


_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>