Towertalk
[Top] [All Lists]

[TowerTalk] Pully's Or Sheet/Bullet Blocks

To: towertalk@contesting.com
Subject: [TowerTalk] Pully's Or Sheet/Bullet Blocks
From: Dick Stein <k2zr@arrl.net>
Date: Wed, 22 Feb 2006 11:23:16 -0500
List-post: <mailto:towertalk@contesting.com>
For whatever antenna applications that require a "pulley", I strongly 
urge ya'll to use a "sheet/bullet block". These are used on sailboats 
and go way beyond the quality of anything you'll find in a hardware store.
Note the PS: link for Harken below. There are many sizes and styles. I 
find the #083 ( with a becket - to provide a pull down loop ) works 
great with just about any wire antenna installation.
If you choose to use the tree limb as your fulcrum, you can bet your 
line, whatever kind it is, is over time going to jam in the limb or break.
Good luck with your antenna project.
Dick
K2ZR
PS: 
 
http://www.onlinemarine.com/cgi-local/SoftCart.exe/online_superstore/sailing/harken_bullet_blocks.htm?E+scstore


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>
  • [TowerTalk] Pully's Or Sheet/Bullet Blocks, Dick Stein <=