I think the main thing to remember is that the purpose of the welding or
wire for that matter is to keep the rebar cage in tact until it has been
covered in concrete. Once the concrete cures, it makes NO difference. I
welded a few cages myself and if you can weld, this is no big deal. If
you cannot weld, buy a roll binding wire and get it over with.
Either way, as long as you cage can be kept in tact until you done the
pour, you are OK
Good luck with the project!
de KR5DX
Dr M J DiGirolamo wrote:
> Don,
>
>
>
> I built my cage from "weld quality rebar" and it was welded by a friend.
> My friend is a certified master welder at a nuclear power plant here in
> Virginia. It took him the better part of a day to do all the work for me.
> Believe me, he knew what he was doing and it still took him that long.
> Fortunately he did it as a friend, free of charge! It weighed over 400#
> when done. This cage was built to spec for a USTower 72' stand alone series
> of towers. I wanted to employ a Ufer ground and that calls for a welded
> cage. As mentioned in another post, it requires a special type of rebar
> (quality of metal mix is monitored) and it's only a little more expensive
> should you decide to go that way.
>
>
>
> Drop me a note if you would like some photos and keep us posted
> regarding your progress.
>
>
>
> 73,
>
>
>
> Mike DiGirolamo, W4XN
>
> Charlottesville, VA
>
>
>
> 73,
>
>
>
> Mike, W4XN
>
> ----------------------------------
>
>
>
> Date: Wed, 10 Dec 2008 08:21:26 +0000
>
> From: Donald Chester <k4kyv@hotmail.com>
>
> Subject: [TowerTalk] Rebar Cage Question
>
> To: <towertalk@contesting.com>
>
> Message-ID: <BLU113-W605AC74CBAF2140D0D56ECF4FB0@phx.gbl>
>
> Content-Type: text/plain; charset="iso-8859-1"
>
>
>
>
>
> I have heard it said many times that one should not weld the rebar cage
> together, but tie it together using tie wires. But I have never heard any
> explanation of why.
>
>
>
> What problems would be caused by welding? I can't see how such a minor
> detail would make any significant difference, but a welded cage is certainly
> easier to handle before the concrete is poured in, and less likely to fall
> apart just as the concrete is being dumped.
>
>
>
> Don k4kyv
>
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|