Towertalk
[Top] [All Lists]

Re: [TowerTalk] HG52SS base

To: K7LXC@aol.com
Subject: Re: [TowerTalk] HG52SS base
From: "Roger (K8RI)" <K8RI-on-TowerTalk@tm.net>
Date: Wed, 19 Aug 2009 12:55:59 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>

K7LXC@aol.com wrote:
> In a message dated 8/19/2009 4:23:43 A.M. Pacific Daylight Time, 
> towertalk-request@contesting.com writes:
>
>     >  Ive used dirt bases at all of my locations since 1961 with nary a
>     problem. They are usually go about 5' down to the crushed rock .  The
>     last couple I fabricated out of 3/4" steel rod and 1/8" Steel
>     strap, 2"
>     wide. I gave it a good two coats of paint and planted it.  Yes it's
>     heavy but didn't cost much and has proven very effective.
>
>     >  The dirt base only serves two real functions; The first to keep
>     the base
>     of the tower from moving sideways and the second is to keep it from
>     sinking into the ground.  Setting it on crushed rock helps here. 
>     However to work well the soil needs to be firm and not acetic.  A
>     hole
>     in damp sand with a half a foot of crushed rock will support a lot of
>     weight.  Pea gravel is not as effective.
>
>         I think we're talking apples and oranges here. The original
>     poster wants to install a free-standing crank-up and I'm surmising
>     that you are referring to guyed towers. Putting a self-supporter
>     in dirt alone is a recipe for disaster. And, as always, follow the
>     LXC Prime Directive to "DO what the manufacturer says."
>

Agreed!  I understood every one to be talking about a "guyed" tower.

73

Roger (K8RI)
>
>     Cheers,
>     Steve    K7LXC
>     TOWER TECH
>
>  
>
> ------------------------------------------------------------------------
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>