Towertalk
[Top] [All Lists]

Re: [TowerTalk] RE; Finding AL Tubing and other Metals

To: "Tower and HF antenna construction topics." <towertalk@contesting.com>
Subject: Re: [TowerTalk] RE; Finding AL Tubing and other Metals
From: "Roger (K8RI)" <K8RI-on-TowerTalk@tm.net>
Reply-to: "Tower and HF antenna construction topics." <towertalk@contesting.com>
Date: Wed, 31 Mar 2010 00:32:01 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>

N7KA@comcast.net wrote:
> Its a bit pricey but try to locate a METAL SUPERMARKET near you.  I use one 
> in ABQ, NM, when I need small qty.  They carry, or can order almost anything 
> hams would use. 
>
>   
I'd look for a local Aluminum supplier. There's a large one about 20 
miles from me. I found them by asking metal fabricating shops where I 
could find some sheet and tube stock. Aluminum sheet and tube are pricey 
even at discount, but many of the suppliers will even cut the sheets to 
shape. I don't know about bending. Small metal brakes (say to make the 
tube sub chassis in an Alpha 76) are relatively simple to make from rod 
and steel angle.  You do need a welder and access to a mill or a friend 
who is a machinist.  Normally the socket cut outs are punched, but a 
small hobbiest mill, or one of those small lathe and mill combinations 
can do cutouts that look professional. Standard Aluminum chassis are a 
tad on the flimsy side. If you don't want to bend up a sub chassis, just 
get some angle and make one like an erector set. Use either screws or 
pop rivets for fasteners. I haven't found any of the press in captive 
nuts yet.

73

Roger (K8RI)
>
> Arne N7KA 
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>   
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>