Obviously, normal precautions about bending radius should be observed.
It is NOT necessary for these chokes to have a tight bend radius to be
effective. I recommend turns of reasonable diameter that satisfy that.
Above about 15 MHz, turns should spaced widely apart except where they
go through the core. See the text, measured data, and photos.
73, Jim K9YC
On 10/10/2010 11:48 AM, Michael Clarson wrote:
> Jim: Can't answer to group from this address. A concern I would have
> using 9913 is likelihood of center conductor migration when winding
> due to lack of dielectric. That one spiral of PE is fine for straight
> runs, but I wouldn't trust it on a tight bend. --Mike
>
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|