A low-cost solution is a strip of "holy angle" from Home Depot and a
couple of U-bolts to attach to the tower. You'll need to drill out the
angle a bit for bulkhead connectors, but the price is right.
73, Pete N4ZR
The World Contest Station Database, updated daily at www.conteststations.com
The Reverse Beacon Network at http://reversebeacon.net, blog at
reversebeacon.blogspot.com,
spots at telnet.reversebeacon.net, port 7000
On 6/20/2011 4:35 PM, Jim McDonald wrote:
> John,
>
> One way is to use brackets from DX Engineering
> http://www.dxengineering.com/Parts.asp?ID=3320&PLID=105&SecID=94&DeptID=19&P
> artNo=DXE-CGB-150 .
>
> I have one but haven't used it yet. I have a DX Engineering remote antenna
> switch at the top and ICE arrestors on a ground rod at the bottom.
>
> Also http://www.thewireman.com/prodpix4.html and
> http://www.thewireman.com/ground.html#857 .
>
> Jim N7US
>
>
>
> -----Original Message-----
>
>> Also bond all of
>> your cables at the top and bottom of the tower.
>>
>> 73
>> Gary K4FMX
>>
> What is the best way to do this and still keep water out of the cable?
>
> 73,
>
> John, K9MM
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|