Thanks Grant,
I have some loops of RG142B with right angle connectors between filters and
antennas switch. It´s very nice because it´s smallest diameter allow easy
connection/disconnection when SO239 are very close to each other in the
antennas switch. I liked it, if this is very good, I can go with this for
the other jumpers.
Thanks!
Jorge
CX6VM/CW5W
-----Mensaje original-----
De: Grant Saviers [mailto:grants2@pacbell.net]
Enviado el: Miércoles, 22 de Febrero de 2012 01:19 a.m.
Para: Jorge Diez - CX6VM; TOWERTALK@contesting.com
Asunto: Re: [TowerTalk] coaxial for loops inside shack
TFE insulated coax's offer the most power handling in the smallest
diameter. For example, RG303/RG142 is rated 1900 volts rms, is
generally available surplus/ebay and PL259 crimp connectors are readily
available. Either can handle legal limit on HF at modest SWRs. These
coax's seem to be frequently sold with the same RG number for both
silver plated single and double braids. RG304 is the next size up,
rated 5000 volts, but I have never seen it other than new and it is
pricey. Connector availability is probably limited, I've never checked.
OTOH, BuryFlex is easy and cheap. RG8X won't handle legal limit
continuous power. For your in shack jumpers, loss is a minor problem at HF.
Many RG214 (double braid shielded RG213) jumpers are available on ebay
as cell system pulls, almost always with N connectors. The fact that it
is used in cell systems attests to its excellent performance.
see
http://www.ebay.com/itm/15-RG-214-24-RF-Coaxial-Jumper-Cable-N-m-/3604345109
06?pt=LH_DefaultDomain_0&hash=item53eb922c3a
Grant KZ1W
On 2/21/2012 11:39 AM, n8de@thepoint.net wrote:
> Jorge,
> I use RG8X for all the interior coax connections as it is very
> flexible and easy to work with.
>
> 73
> Don
> N8DE
>
>
> Quoting Jorge Diez - CX6VM<cx6vm.jorge@gmail.com>:
>
>> Hello,
>>
>>
>>
>> What do you think is the best choice for doing all the loops inside the
>> shack: radio to amp to SWR metter to antennas switch to bandpass filters,
>> etc. All this use PL259 connectors.
>>
>>
>>
>> I am looking for the best solution to unify all the coax I have inside
the
>> shack, trying to have a good quality coaxial, for low loss and that
support
>> legal limit power.
>>
>>
>>
>> Thanks,
>>
>> Jorge
>>
>> CX6VM/CW5W
>>
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk@contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
>>
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
-----
Se certificó que el correo no contiene virus.
Comprobada por AVG - www.avg.es
Versión: 2012.0.1913 / Base de datos de virus: 2113/4823 - Fecha de la
versión: 21/02/2012
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|