Towertalk
[Top] [All Lists]

Re: [TowerTalk] TowerTalk Digest, Vol 64, Issue 27

To: "towertalk@contesting.com" <towertalk@contesting.com>
Subject: Re: [TowerTalk] TowerTalk Digest, Vol 64, Issue 27
From: Bill Fuqua <wlfuqu00@uky.edu>
Date: Sat, 12 Apr 2008 22:16:39 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
    This grease is simply a very pure silicone grease.It has no 
contaminates or hydrocarbons in it as does the cheaper silicone greases do. 
What makes is good for high vacuum should be good for connectors.  It has 
nothing in it that will promote corrosion or react with the elements to 
cause problems.
   I use it in rotator bearings as well.

73
Bill wa4lav


At 11:37 PM 4/10/2008 -0400, towertalk-request@contesting.com wrote:
>I seem to remember someone mentioning the use of Dow Corning's high
>vacuum grease for coax connections. I found the product on the website
>below, but the product information doesn't say anything about it's use
>for RF connections.
>
>http://www.2spi.com/catalog/vac/dow.shtml
>
>It is silicon based and works in extreme temperatures, but I was
>wondering if there's another Dow product under the same name
>specifically made for RF connections? Anyone have experience with this
>product?
>
>Tony -K2MO

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>
  • Re: [TowerTalk] TowerTalk Digest, Vol 64, Issue 27, Bill Fuqua <=