Towertalk
[Top] [All Lists]

Re: [TowerTalk] Welding Aluminum Tower

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Welding Aluminum Tower
From: Dino Darling <k6rix@earthlink.net>
Date: Fri, 19 Nov 2004 09:19:48 -0800
List-post: <mailto:towertalk@contesting.com>
Take it to an experienced welder and have it TIG welded! Since you will burn away any anodizing, I would suggest painting it and checking on those joints yearly!

(sorry you are getting this message twice Doc!)

At 12:23 PM 11/19/2004 -0500, you wrote:
I am considering the purchase of a 50 foot aluminum
tower that needs two or three welds repaired.

I did a little Google search and found some pretty
wide-ranging options, the durafix one sounds the
easiest to handle -- if reliable.

http://durafix.com
http://www.muggyweld.com/pricelist.html
http://store.weldingdepot.com/cgi/weldingdepot/index.html?id=Xeaxsjiw
http://www.cut-like-plasma.com/?durafix

Experienced counsel here?

--
Thanks! & 73, doc kd4e
West Central Florida  100% Linux.  Suse 9.2
Drake, Icom, Hallicrafters, Heathkit, TenTec, Yaesu
Radio Life: http://www.gospelcom.net/twr/
Linux-Incompatible hardware is defective!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
_______________________________________________

See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

Dino...k6rix@earthlink.net


_______________________________________________

See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>