On 2/10/13 12:11 PM, Jim Brown wrote:
There are two elements to the protection. First, the coax shield is
bonded to the panel and from there to the rest of the ground system.
Second, the gas tube shorts the center conductor to the shield, which
limits the voltage at the equipment input.
73, Jim K9YC
On 2/10/2013 7:49 AM, David Jordan wrote:
Jim,
Isn't part of the Polyphaser lightning protection circuit a spartgap?
I opened one up and thought I saw a gas tube.
yes, a gas tube is basically a calibrated spark gap that fires at some
voltage.
The question *I* would have is whether a gas tube can take a 10-50kA
pulse. I'd make a spark gap out of something like angle iron at the
antenna, and let the gas tube take care of the residual transient at the
shack end.
A 1/10" uniform gap will fire at 7kV... once it fires, though, the
voltage drop will be around 100-150V.
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|