EZNEC gets close enough for most practical purposes
http://www.karinya.net/g3txq/hexbeam/eznec2/
The EZNEC predictions of the relationship between F/B and tip spacing
are borne out by practical measurements.
Steve G3TXQ
On 20/03/2013 19:02, W1YW@aol.com wrote:
NEC is not capable of accurately modeling such close spacings. Its listed
as an error condition to avoid .
73,
Chip W1YW
In a message dated 3/20/2013 2:56:54 P.M. Eastern Daylight Time,
steve@karinya.net writes:
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|