On 2025-10-01 2:51 PM, Wes Stewart via TowerTalk wrote:
At the very end of the cable (or connector) there is no inside and
outside of the outer conductor, there is just the conductor, hence
there is no skin effect at that point.
This is only true if the shield is simply "cut" as in the case of
the coaxial vertical. If the cable is terminated in a connector
- either soldered or crimped - the finite thickness of both the
shield and the connector will maintain the two wire behavior of the
shield through the "splice" so long as the shield and connector
are more than 'n' skin depth thick at the operating frequency.
Even in the case of a braided shield, RF flows *on the surface* -
it does not "weave back and forth" with the braid. This is one
reason that "hardline" and cables with a second foil shield have
lower losses than equivalent size size "double braided" cables.
Common mode currents - unbalanced currents on the exterior of
the shield - are an electromagnetic phenomena and only possible
because RF fields force the current to the *surface* of the
shield - either the outer surface for externally applied (common
mode) fields or the inner surface for differential (transmission
line mode) fields.
The only time those currents are combined is when the transmission
line is interrupted - e.g. the shield is formed into a pigtail -
at an antenna or when brought into equipment without proper
concern (design) for "pin 1" issues.
In any case, common mode currents can be present in non-coaxial
lines. Even simple "zip" cord or other parallel lines can be
treated by applying an impedance to the unbalanced circuit (as
is quite common in noise suppression applications).
73,
... Joe, W4TV
On 2025-10-01 2:51 PM, Wes Stewart via TowerTalk wrote:
Jim,
I think you're missing Jack's very interesting point. I've used an open ended
cable as an example, but a mated pair of your favorite connectors is no different.
At the very end of the cable (or connector) there is no inside and outside of the outer conductor, there
is just the conductor, hence there is no skin effect at that point. I'm not smart enough to figure
out how far down the cable the skin effect develops. But this raises a question in my mind. We've
all seen a thousand times the drawing of a coax-fed dipole, where current is "spilling over"
the open end and becoming a common-mode current on the outside of the cable. A smarter mind than
mine needs to 'splain this to me.
Wes N7WS
On Wednesday, October 1, 2025 at 10:28:53 AM MST, Jim Brown
<jim@audiosystemsgroup.com> wrote:
On 10/1/2025 7:46 AM, Jack Brindle via TowerTalk wrote:
Connectors are very important in this system. They must be added to the
analysis. Without them, we have to question the validity of the tests.
No. Common mode and differential mode currents are a characteristic of
transmission lines, and common mode can be present on 2-wire lines if
the system that includes the antenna, the transmission line, and
termination in the shack has imbalance. The mechanism by which common
mode in coaxial line is on the outside of the shield is skin effect, and
it's present in those connectors.
Soldered or crimped, the connector(s) is/are simply part of the
transmission line, carrying the differential and common mode current
that is in that system (antenna, line, shack). Depending on their
construction, they can introduce some discontinuity in the differential
circuit.
73, Jim K9YC
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|