On 5/29/2013 7:57 PM, Steve Maki wrote:
On 5/29/2013 3:52 PM, Cqtestk4xs@aol.com wrote:
Been doing swinging arms for years...
Make sure the tower face is set in such a way as to allow the rotation in
the direction you want. You can make a model of this on a piece of
acetate
over a drawing. It makes it easier to visualize.
Make an effort to place the mount just above a set of guys as sidemounts
really tend to torque a tower. Ask anyone who has ever been on a tower
with a large beam sidemounted, and then had someone in the shack
rotate the
beam. Even without hitting the brake on the rotor it can be
uh...exciting.
Which is why I always chuckle when someone, apparently thinking of their
tower as some sort of rigid rod (sorry about that :-)), agonizes over
their rotator brake.
Now mine never did that. You could just feel it in the tower when it
started or stopped and it was a big antenna...as far as UHF, TV antennas
go<:-))
On a 45G the gate will likely be 2 feet long. If that's the case,
multiply the weight of the antenna by two for the off center leverage in
foot pounds. How fast it decelerates, or accelerates will give the force
in Gs. So you then multiply the leverage in ft lbs by Gs to get the
twisting force on the tower. Ever get an antenna rotating on a shaft
and then try to stop the rotation by gripping the shaft, or just hold
one against the wind. Be careful, you can lose a lot of hide doing this
experiment.
73
Roger (K8RI)
-Steve K8LX
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|