Hi Luciano -
I'm using a 2L Moxon, converted from a Cushcraft XM240 as specified by
the legendary Dave Leeson, W6NL. It's a great antenna, although if I
had to do it all over again, I'd start from scratch rather than with an
XM240.
Read Dave's description of the 40M Moxon, along with a comparison to a
3L Yagi, here: http://www.kkn.net/dayton2004/W6NL_40M_MOXON_YAGI.pdf
Additional excellent documentation is available at K3LR's website:
http://www.k3lr.com/engineering/
Hope this helps.
73,
Steve
NN4X
On 10/25/2015 2:33 AM, towertalk-request@contesting.com wrote:
> Send TowerTalk mailing list submissions to
> Date: Sat, 24 Oct 2015 22:17:48 -0300
> From: " luciano_nachif@yahoo.com " <luciano_nachif@yahoo.com>
> To: towertalk@contesting.com
> Subject: [TowerTalk] 40 metres yagi - Your advice matters
> Message-ID: <806858.77992.bm@smtp207.mail.ne1.yahoo.com>
> Content-Type: text/plain; charset=utf-8
>
> I've been thinking about buying a 3 or 4 elements 40m yagi for long
now. I've talked to factory representatives at Dayton hamvention but
haven't heard from those who actually own them.
>
> Having said that, which 3 or 4 elements 40m yagi would you recommend,
please? Would you consider a linear loaded one like M2 40M4LLDD or would
you go for the full sized one such as the JK404 Grande from JK Antennas?
Cost benefit is of utmost importance as the Brazilian Real x American
Dollar rate doubled in the last months.
>
> 73,
>
> Luciano PT9KK
>
> Sent from my HTC
>
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|