Hi,
Thanks for all your suggestions.
As Dacron and Kevlar ropes are not available here, i think i have an
alternative non conductive strong material close of my town.
Somebody know the SLING used to move products at the harbor ???...from
and to the ship.
I think i can get that SLING from the harbor...i know it is very
strong but i dont know if this material can survive the weather
here...UV radiation and marine environment.
73....Douglas, CO8DM
"No creo que haya alguna emoción más intensa para un inventor que ver
alguna de sus creaciones funcionando. Esa emoción hace que uno se
olvide de comer, de dormir, de todo." - Nikola Tesla
----- Original Message ----- From: "Ed Sawyer" <sawyered@earthlink.net>
To: <towertalk@contesting.com>
Sent: Monday, December 14, 2015 8:19 AM
Subject: [TowerTalk] Can?t add egg insulator...
Stan, K5GO said "At risk of purists saying absolutely not, if I were
going
to put up just 30 feet of 25G tower and didn't have all the proper
materials
to insulate the guy wires and guy it as would normally be done, I
wouldn't
hesitate for a moment to put two levels on that small tower using 3/8"
diameter polyester (Dacron) low stretch rope. The antenna will blow
apart
first eliminating a potential problem and rope doesn't rust."
I would second Stan's suggestion for 2 reasons: 1) a spider beam is
going to
collapse anyway under a really strong Hurricane wind and 2) whenever
someone
says "rooftop" tower, what they really are saying is "how strong are my
anchor points anyway?". This is all about the ability of the guy
anchors to
support the pull of the tower in wind. Rarely is any roof connection
system
up to the task. By support with a strong rope, you kill many birds
with one
stone and you likely don't add any weakness vs the anchor points.
I had a 60 ft tower of 25G support by 2 sets of rope guys for 5 years
as my
160M vertical. It was heavy rope and there was a plate under the
tower. It
was purposely not permanent because it was on a farmers land. I had to
remove it when the land sold. Now I have 2 T top wire verticals -
phased.
Ed N1UR
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk