On Mon,5/9/2016 2:22 PM, Timothy A. Holmes wrote:
As I purchase new feedline for the project, What kind should I get
RG????, LMR???? Etc
For HF and up to 6M, RG8/RG213 with a heavy copper braid from a known
good cable mfr. I like Buryflex a lot. http://www.davisrf.com/buryflex.php
Heres the setup:
Radio - Icom 706MKIIG barefoot
This is the VERY weak spot. It's worth replacing it with something a lot
better. Weaknesses are a lousy receiver and lots of noise on transmit
(your neighbors on the bands will be unhappy).
Antennas - 3 element tribander (cant remember the model name but its a
real one)
- 9 Element horizontally polarized 2m beam
- 3 Element 6 meter beam
- Some previously un determined 44 beam (what I can find
inexpensively as I dont use 440 much at all)
- 2 / 440 vertical on a side arm mount
The run from the pass through in the shack window to the top of the
tower will be 100' or close enough not to matter. Price is somewhat
of a concern, but I am looking for quality. As previously noted, I am
close to DXEngineering, and for simplicity sake would like to use
their products
Then why are you asking here? Just call them up and buy it.
73, Jim K9YC
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|