0.1 to 1300 mhz, AM, SSB,
Works fine for such a test.
https://www.kenwood.com/usa/com/amateur/th-f6a/spec.html
Sent from my iPad
> On Oct 9, 2024, at 17:47, Jack Brindle via TowerTalk
> <towertalk@contesting.com> wrote:
>
> Might want to reconsider that. According to the Kenwood specs:
> "M/FM-W/FM-N/AM plus SSB/CW receive”
>
> That means it receives a lot more than just FM, so it should be good for
> these tests depending on how sensitive the rx is.
>
> 73,
> Jack, W6FB
>
>
>> On Oct 9, 2024, at 4:24 PM, john simmons <jasimmons@pinewooddata.com> wrote:
>>
>> Respectfully, this isn't a good test. Your HT is FM and per Wikipedia,
>>
>> "FM rejects radio frequency
>> interference<https://en.wikipedia.org/wiki/Radio_frequency_interference>
>> better than an equal power amplitude modulation
>> (AM)<https://en.wikipedia.org/wiki/AM_broadcasting>". You need an AM
>> receiver to detect any noise.
>>
>> 73
>> -de "Curly" John NI0K
>> QRZ.com<https://www.qrz.com/db/ni0k>
>> Hamshack Hotline<https://hamshackhotline.com/> call me: 6100271
>>
>> On 10/9/2024 1:54 PM, Jim Brown wrote:
>> Kenwood TH-F6A
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk@contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|