Towertalk
[Top] [All Lists]

Re: [TowerTalk] Heights Tower - Separating Aluminum from Steel

To: Glenn Rattmann <k6na@cts.com>, towertalk@contesting.com
Subject: Re: [TowerTalk] Heights Tower - Separating Aluminum from Steel
From: Bill Tippett <btippett@alum.mit.edu>
Date: Wed, 22 Jun 2005 12:36:09 -0400
List-post: <mailto:towertalk@contesting.com>
K6NA wrote:

>I would first soak the joints in lots of PB Blaster and tap on them
>periodically for a day or two.  Then carefully apply some heat and see if
>it breaks loose.

Hi Glenn...that's a nice summary ofthe consensus!
Will ask Dave's 86 year old widow to have a neighbor
pre-treat the joints a few days before I go back
up there.  Thanks to all for the suggestions and
I'll let everyone know how it works out.

                         73, Bill  W4ZV 

_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>