Towertalk
[Top] [All Lists]

Re: [TowerTalk] EHS leader on phillystran guys

To: <towertalk@contesting.com>
Subject: Re: [TowerTalk] EHS leader on phillystran guys
From: Pete Smith <n4zr@contesting.com>
Date: Tue, 23 May 2006 17:02:21 -0400
List-post: <mailto:towertalk@contesting.com>
At 04:02 PM 5/23/2006, bob finger wrote:
>Torque arms do the same function ie protecting the guys from tools etc.  
>Easier than making up EHS and far easier to install.  That 
>"professionally installed" tower did have guy brackets and torque arms, yes?
>
>Rohn 45 torque arms are 19.5 inches long. 
>
>By the way  "out of reach" and "avoid damage....brush fires".  may not 
>be the same.  Don't forget that brush fires create heat and it is the 
>heat that will damage the phyllistran.  To me that means ehs to at least 
>20 feet vertically from the ground anchor and that is not 20 feet of 
>ehs.  73 bob de w9ge
>
>Dick Green WC1M wrote:
>
>>Hi. I plan to follow the recommendation that short EHS leaders 
>>  
>>

If your tower is in a wooded location, it is also important to avoid situations 
where tree branches moving in the wind can abrade the Phillystran.

73, Pete N4ZR


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>