Or wrap the bottom of the tower in hardware cloth, wired to the legs. Then
use a ladder to get past it when you need to climb. Simple, cheap, and
effective - thanks Lamar (WA7LT) for the idea.
73, Pete N4ZR
At 07:34 AM 3/29/2008, K7LXC@aol.com wrote:
>
>In a message dated 3/28/2008 12:36:47 P.M. Pacific Daylight Time,
>towertalk-request@contesting.com writes:
>
> > Anyone used the Rohn anti climb sheets on 55 or 45? I've got them and a
>bunch of 55 tower, all I can tell from the sheets is that you stand them up
>around the tower and sheet metal screw them to each other. I guess you just
>build this triangle around the base and let it rattle and bang around in the
>wind?
>
> They're not that complicated. I've made them out of sheets of thin
>plywood or sheetmetal. Drill some holes in the material and then use hose
>clamps to affix it to the tower. Simple and cheap.
>
>Cheers,
>Steve K7LXC
>TOWER TECH
>
>
>
>
>
>
>
>**************Create a Home Theater Like the Pros. Watch the video on AOL
>Home.
>(http://home.aol.com/diy/home-improvement-eric-stromer?video=15&ncid=aolhom00030000000001)
>_______________________________________________
>
>
>
>_______________________________________________
>TowerTalk mailing list
>TowerTalk@contesting.com
>http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|