John
I have my main antenna - dipole- at 130ft and below is the RX antenna ,
using the MFJ -1026- to protect my front end there is a small fuse , that is
only a 50ma 12v bulb, before the antenna reach that fuse I add a small fast
relay to protect the RX port
works for me where having close antennas
For me is better protect than pay repairs
J. Hector Garcia XE2K / WT6J
Mexicali B.C DM22fp
P.O.Box 73
El Centro CA 92244-0073
USA
http://www.xe2k.net
http://www.dxxe.org
--- On Wed, 1/13/10, jcowens1@comcast.net <jcowens1@comcast.net> wrote:
From: jcowens1@comcast.net <jcowens1@comcast.net>
Subject: [TowerTalk] FT1000MP
To: "Towertalk" <towertalk@contesting.com>
Date: Wednesday, January 13, 2010, 10:50 AM
Would like to get in touch with anyone who did own or does own a FT1000MP and
has used the separate receive antenna jack for a receive only antenna while
using the A or B antenna jacks for the transmit antenna. The manual does not
say if it blanks the receive antenna input when transmitting. This could cause
a problem with RF coming into the receive jack when transmitting on A or B on
the same band. Anyone operating Top Band and using separate Rx and Tx antennas
would likely have done this.
John Owens - N7TK
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|