I have a HyGain TH3-MKIII that has about 1 foot of the boom gone from a
fall. I have a piece of another boom- same size with a swage that will go
into the boom 5 inches (2 1/2 inch split in boom). I plan to use a hose
clamp and think I should rivet the splice to the boom at the split outside
ends to control torqueing. If I use rivets, I feel the split should face
UP, as facing downward will tend to open or bulge the split with downward
force. The split will be sealed with butyl rubber and chrome tape under the
hose clamp.
Am I missing/overlooking something with this plan?
Thanks!
Eddie, WB4MLE
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|