In a message dated 6/12/01 10:58:13 AM Pacific Daylight Time,
w2up@mindspring.com writes:
> I have threaded anchors in rock that are used for a pool cover. The
> anchors are stainless steel, and are similar to lead masonry
> anchors I've seen at Home Depot. Some of the anchors have
> loosened in the rock. Is there some kind of epoxy or other material
> I can use to tighten things back up?
Sure. Call up a local industrial supplier and ask them. There are plenty
of industrial epoxies that'll work. Your load factors are pretty low so just
about anything will work.
Cheers, Steve K7LXC
Tower Tech
List Sponsor: Are you thinking about installing a tower this summer? Call us
for information on our fabulous Trylon Titan self-supporting towers - up to
96-feet for less than $2000! at 888-833-3104 <A
HREF="http://www.ChampionRadio.com";>
www.ChampionRadio.com</A>
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|