In a message dated 4/5/01 12:54:55 PM Pacific Daylight Time,
n4zr@contesting.com writes:
<< At 02:33 PM 4/5/01 +0100, Bill Tippett wrote:
...
>P.S. Personally, I would go with a driven system (Comtek) if I were
>using full-size dipoles...you only need 4 instead of 5 and the results
>are more predictable using a forced system IMHO.
Actually, the parasitic systems work fine with 4 or even three dipoles,
although the beamwidth increases proportionately. Wx0B and I are arguing
offline about which system shows better F/B and gain in modeling...
One thing that hasn't been mentioned is that the tower in the center of
such an array can play a significant role, at least as reflected in the
currents that flow on it. I'm not sure what experience has been with the
effect of a tower in the center of a 4-square.
73, Pete N4ZR
Contesting is!
>>
Why not use a telephone pole? k7gco
List Sponsor: ChampionRadio.com - Trylon self-supporting towers, safety
equipment, rigging gear, LOOS tension guages & more!
http://www.championradio.com
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|