Towertalk
[Top] [All Lists]

Re: [TowerTalk] 6 mtr quad

To: Herbert Schoenbohm <herbert.schoenbohm@gmail.com>, "towertalk@contesting.com" <towertalk@contesting.com>
Subject: Re: [TowerTalk] 6 mtr quad
From: Bob Matthews <kt3rr@verizon.net>
Reply-to: Bob Matthews <kt3rr@verizon.net>
Date: Tue, 30 Aug 2016 00:54:46 +0000 (UTC)
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
I found a website that had plans for a 9 element yagi.
ZS2FM 50Mhz Antenna And Preamp

|   |
|   |  |   |   |   |   |   |
| ZS2FM 50Mhz Antenna And Preamp50Mhz HIGH GAIN ANTENNA AND MASTHEAD 
PREAMPLIFIER BY MIKE BOSCH ZS2FM *** First published in Radio ZS, April/May 
1985 ***  |
|  |
| View on www.qsl.net | Preview by Yahoo |
|  |
|   |


I don't believe that building a very large, more than 4 element quad would be 
beneficial to you.I have found that quads usually perform better than yagis 
with the first 4 element s are concerned. Anything larger than that, stick with 
a yagi. a quad does well at lower heights usually as compared to a yagi at the 
same lower elevations. But with 6 meters there shouldn't be any reason not to 
be able to get it up over 1 wavelength if not more.The yagi will give you less 
trouble and maintenance.I'm sure there are other plans out there, the above is 
just what came up on my first search.
Bob

      From: Herbert Schoenbohm <herbert.schoenbohm@gmail.com>
 To: towertalk@contesting.com 
 Sent: Monday, August 29, 2016 8:06 PM
 Subject: Re: [TowerTalk] 6 mtr quad
   
One of the issues with wide spacing on quads is that they may lose 
coupling from the driven elements and don't develop the gain one would 
expect.  A quagi idea works but that uses a quad driven element and 
reflector with the rest of the elements being conventional. I use here a 
3 element quad for 20-10 and on another tower I have Hi-Gain 5 element 
beams.  Most of the time they are equal while listening on a websdr 
overseas.  There are times when the yagi is slightly better...but only 
slightly.



Herb, KV4FZ


On 8/29/2016 7:52 PM, Courtney Judd wrote:
> Boxbe <https://www.boxbe.com/overview> This message is eligible for 
> Automatic Cleanup! (k4wi@k4wi.net) Add cleanup rule 
> <https://www.boxbe.com/popup?url=https%3A%2F%2Fwww.boxbe.com%2Fcleanup%3Fkey%3DMsMeNqcJV42BizxW8cE423iybDIroM6xraGpXaagUGE%253D%26token%3DdvnS%252FL9xeSIsj6hfEZp5mSeGmEeZIeNRJCzEplnz4Vaq2Aa7N%252B%252BYxnZNRYscCTiR9WS9eYKsdNpYp2HaJFAk%252BMOeV6rGtCn2bGXwWsKzRQqJwq8zqfI2IEVPo9jVg7WoxeC%252Btdku5v8%253D&tc_serial=26604811820&tc_rand=621091751&utm_source=stf&utm_medium=email&utm_campaign=ANNO_CLEANUP_ADD&utm_content=001>
>  
> | More info 
> <http://blog.boxbe.com/general/boxbe-automatic-cleanup?tc_serial=26604811820&tc_rand=621091751&utm_source=stf&utm_medium=email&utm_campaign=ANNO_CLEANUP_ADD&utm_content=001>
>  
>
> I have been thinking about building a monster quad for 6 mtrs. I have 
> googled quads and all about but came up with very little data to work 
> with. I did find a 7 el regular spaced quad on 19 ft boom but I was 
> thinking of more elements and wide spaced... I have several 44 ft 2 in 
> booms or even a 60 ft 3 in boom. I wanted to stick this on my rohn 45 
> at 100 ft. Anyone have any ideas or can point me to a web site or 
> reflector where i could find something like this? Thanks, Cort K4WI
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk


   
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
<Prev in Thread] Current Thread [Next in Thread>