Towertalk
[Top] [All Lists]

[TowerTalk] Fwd: Aluminum Towers

To: towertalk@contesting.com
Subject: [TowerTalk] Fwd: Aluminum Towers
From: Hans Hammarquist <hanslg@aol.com>
Date: Fri, 10 Aug 2012 15:54:57 -0400 (EDT)
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Hi Jerry,

I have a Universal Tower in my back yard and am happy with it. As it is only 
part Universal (and part Heights) I decided to put up a few guy wires (4) with 
it. (Makes it stand 130 MPH wind with 20 sqf wind load). The Universal pieces 
fit very well together and I find it very plausible you will be able to do the 
gin-pole job. My tower has a total high of 85'.

Hans - N2JFS



-----Original Message-----
From: Jerry Gardner <jerryw6uv@gmail.com>
To: Tower Talk List <towertalk@contesting.com>
Sent: Thu, Aug 9, 2012 2:24 pm
Subject: [TowerTalk] Aluminum Towers


I plan to install a 50' tower and a tri-bander for 20/15/10 and was
originally considering a U.S. Towers 55' crank-up model. While researching
towers, I came across a company called Universal Towers that sells aluminum
free-standing towers.

Based on the specs, the Universal Towers HD-21-50 aluminum tower looks like
it might be a better fit for the following reasons:


   - * At $1989 it's $2K cheaper than the U.S. Tower crank-up
   - * It only weighs 190 pounds (spread over five 10' sections), versus
   >800 for the crank-up, making it a lot easier to get off the truck with
   fewer people
   - * The base doesn't require a rebar cage, making installation simpler
   - * It won't rust


The HD-21-50 is rated at 21 sq.ft. at 110 MPH, while the U.S. Tower
crank-up is rated at 30 sq.ft. at 50 MPH.

The installation instructions for the aluminum tower says to assemble the
tower on the ground, attach the antenna(s), and then walk it up. In my
case, I don't have 50' of horizontal space to do this. Is it feasible to
climb this type of tower and assemble it vertically section-by-section with
a gin pole? (Whatever I put up will be installed by a professional tower
installer.)

Any reason why I shouldn't consider this aluminum free-standing tower?

- 73, Jerry
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

 
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>