Groundingthe shield (and not the return wire) at both ends is for shielding
purpose, but Ibelieve, as long as the shield can carry any current from a
lightningstrike (with it probably can't) it will enhance the
lightningprotection as well.
Hans - N2JFS
-----Original Message-----
From: Steve Dyer <w1srd@yahoo.com>
To: towertalk <towertalk@contesting.com>
Sent: Fri, Nov 22, 2013 8:42 pm
Subject: Re: [TowerTalk] Fwd: Wire grounding question
Does grounding the shield on both ends enhance the shielding or is this
for lightning protection?
73,
Steve
> In my humble: You shall ground the shield in both the tower end and the shack
end. You should NOT ground the pair anywhere but at the controller, that is;
you
should only connect the wire pair to the magnetic sensor in the rotor and keep
that assembly away from everything else (electrically). The wire pair should be
connected to "high" and "low" at the controller and only see ground through the
controller circuit. That should give you the optimal shielding.
>
>
> Hans - N2JFS
>
>
>
> -----Original Message-----
> From: Ray Benny <rayn6vr@cableone.net>
> To: TowerTalk <TowerTalk@contesting.com>
> Sent: Thu, Nov 21, 2013 3:02 pm
> Subject: [TowerTalk] Wire grounding question
>
>
> I am using a K7NV prop-pitch rotator for my almost completed tower project.
> For the encoder (magnetic pulse counter) that is mounted inside the PP
> motor, I am using a 2 pair small wire cable that has an aluminum foil
> shield and ground wire. I will be installing a lightning arrestor at the
> base of the tower for these two conductors.
>
> My question, should I ground this foil shield or leave it floating at both
> ends (PP rotator and rotator control box)? I would think that it should be
> grounded, but does it matter? Any consequences if I do or don't?
>
> Ray,
> N6VR
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|