Yep; thats how I did my TX 472 - 1 under, 2 on top.
73, alan K9MBQ
-----Original Message-----
>From: K7LXC@aol.com
>Sent: Apr 13, 2010 2:00 PM
>To: towertalk@contesting.com, fserota@msn.com
>Subject: Re: [TowerTalk] Where should the nuts go?
>
>
>In a message dated 4/13/2010 10:20:10 A.M. Pacific Daylight Time,
>towertalk-request@contesting.com writes:
>
>> Just putting up a new TX455. The base plate comes with 3 nuts on each
>long
>bolt embedded in the concrete. Question is: Do 2 nut belong below the
>baseplate for locking the level, and one nut above the plate, or the other
>way around with one nut below and 2 nuts above?
>
> The weight of the tower will keep the bottom nuts from going anywhere.
>You double nut the top of the bolts to make sure they won't go anywhere
>either.
>
>Cheers,
>Steve K7LXC
>TOWER TECH
>UST Factory authorized installer
>
>
>
>
>_______________________________________________
>
>
>
>_______________________________________________
>TowerTalk mailing list
>TowerTalk@contesting.com
>http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|