Towertalk
[Top] [All Lists]

[TowerTalk] Rotor load

To: <towertalk@contesting.com>
Subject: [TowerTalk] Rotor load
From: K7LXC@aol.com (K7LXC@aol.com)
Date: Thu, 20 Feb 1997 19:08:06 -0500 (EST)
In a message dated 97-02-20 18:20:24 EST, Luis_Delgadillo@mx.xmex.xerox.com
writes:

>I 've ordered a Force12 C-4SXL beam,
>according to the specs it has 8.4 sq. ft of wind load.
>The rotor I have is a -still on the box- Yaesu 450XL (10.7 sq. ft).
>I will add only my 2M Cushcraft 5/8" vertical.
>The area where I live the wind gusts rarely exceed 50 MPH. 
>Questions are: 
>-What I should expect in terms of Rotor life?
>- Should I forget about it (450XL) and upgrade to the next model ?
>
    The Effective Moment (or Yaesu K-Factor) is the best measurement of
rotator capacity.  It is the weight of the antenna times the turning radius.
 The Effective Moment  of the C4SXL is 1080 ft./lbs.  The capacity of the
450XL is 722 ft/lbs; not the most suitable rotator for you.

    The Yaesu G-800 is 1299 ft/lbs, the Ham IV is 2800 ft/lbs.  The Create
RC5A-2 would be worth looking at but I don't have an Effective Moment figure
for it; it would be more like the Ham IV spec.

    IMO if you can get more than 5-6 years service life out of any rotator
(except the prop pitch), you're doing pretty well.

73,  Steve  K7LXC

    TOWER TECH -- professional tower supplies and services for amateurs

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Sponsored by:             Akorn Access, Inc. & N4VJ / K4AAA

<Prev in Thread] Current Thread [Next in Thread>