I have heard of others taking their motors to a local electric motor
shop to be rebuilt. Costs normally are pretty low compared to a new
replacement...and these motors are pretty common.
Rich N7TR
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of K0DAN
Sent: Monday, December 12, 2011 5:02 PM
To: Fred Hurd
Cc: TowerTalk@contesting.com
Subject: Re: [TowerTalk] Rain Water Getting Into TX-472 Motors
I don't have that brand tower but the solution is rather generic.
A cover for the motor can never hurt, but when you search for a
replacement motor, look for something that is rated for "wash-down
service". This is still not a "submersible" motor (!) but is rated for
wet environments (think farm machinery, food processing, etc., electric
motors which are out in the elements or or spray washed frequently).
Even a wash-down motor can have its problems....those little
compartments which contain the control relays, starter caps, etc., can
leak, and should be inspected periodically, gaskets replaced, also
protected with a bead of silicone caulk.
If your motor is exposed to a lot of blowing rain, ice melt, etc., take
steps to identify the source and protect the motor. Run the motor
frequently...lack of use is a definite no-no.
Change the oil in the gearbox once a year and inspect/lube pulleys,
bearings, etc..
A small amount of annual preventative maintenance will go a long way to
extending the life of your motor, but eventually they will all need
replacement.
Remember, the tower manufacturers don't build their own motors....they
buy them from electric motor suppliers, so if you look hard enough you
will find a suitable replacement and will not have to spend the big
(marked up) bucks by buying a replacement from the tower mfgr.
Hope this helps.
73
dan
k0dan
-----Original Message-----
From: Fred Hurd
Sent: December 12, 2011 06:12 PM
To: towertalk@contesting.com
Subject: [TowerTalk] Rain Water Getting Into TX-472 Motors
The motor unit installed on my TX-472 US Tower has been soaked
internally by rain water leaking into the motor housing resulting in
motor rusting and corrosion internally. Now the motor is drawing too
much current to start up and blowing the electrical source fuse. Contact
with the motor manufacturer reveals that these motors were not designed
to be exposed constantly to weather but used primarily with generators
within weather protected housing.
I am curious if other TX Tower owners have experienced similar problems
with the motors being damaged by rain water. Has anyone found a
replacement motor that can survive heavy rain? Or is the only solution
using a cover over the motor?
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|