Tom--
I have the earlier model of this antenna; They appear to differ mainly in
manufacturing details. I tested it by aiming it straight up at about 4 feet.
It matched the curves in the users manual very closely. Your readings all
seem to be high.
They put the values to be expected in the manual, and I think they are
available on the net. Do you have the manual? How is yours connected to the
feed line?
Good luck--Bill-W4BSG
----- Original Message -----
From: "mrlogs" <mrlogs@verizon.net>
To: <towertalk@contesting.com>
Sent: Wednesday, March 18, 2009 3:58 PM
Subject: [TowerTalk] A3S Tuning Question
> Greetings all...
>
> I'm checking the A3S I have presently on the new tower (work in
> progress)..I have the Reflector cranked up about 10 ft from the ground
> (antenna facing up at 45 deg angle) and get these SWR readings on my AEA
> Analyst:
>
> 14150: 2.25
> 14200: 2.47
> 14250: 2.53
> Lowest SWR below band at 13900 at 1.63
>
>
> 21200: 2.13
> 21300: 2.67
> Lowest below band at 20.900 at 1.1
>
>
> 28300: 2.07
> 28350: 2.17
> 28450: 2.38
> Lowest below band at 27600 at 1.08
>
> Yeah..I know this will "pass"..but are the SWR(s) all lowest below the
> band cause it's low to the ground...or can it be tweaked to move resonance
> up to the band...The instructions just say to have it 3ft or so above
> ground to check it..I have it about 10..Are these antennas tweakable
> (tunable)?..What do you tweak..the driven element..or just leave well
> enough alone?
>
> Thanks Again!
> 73'..Tom N3ZC
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|