This is what is on my HG52SS:
http://www.dutton-lainson.com/proddetail.php?prod=24872
It came this way from the factory, in the early 80's.
I rebuilt the winch several years ago.
All still works great.
John - KA7CVJ
________________________________
-snip-
From: Michael Goins wmgoins@gmail.com
Please share. I have a HG52SS here that has an AC winch on it in
unknown
condition at the moment. I am considering a switch to a newer DC motor.
Mike, k5wmg
Pipe Creek, Texas
Green cars, slow boats, big dogs, old trucks, little radios, and summers
off
to write
On Fri, Nov 12, 2010 at 1:52 AM, Terry G. Glagowski <
TGlagowski@sbcglobal.net> wrote:
> I Have a Tristao 52 ft tower, very similar to the HG52SS...
> And I too am looking for a winch / hoist that is appropriate for this.
> The tower itself weighs 550 pounds and there are 3 sections, two of
which
> are
> supported by the cable.
> Simple arithmetic puts the weight of the upper two sections somewhere
under
> 400
> lbs then there is the weight of the mast and antennas. Perhaps around
500
> pounds is a good figure to start from for the minimum weight
requirements.
>
> Here are some URL links that I have investigated:
>
> http://www.americanwinchesandhoists.com/
<http://www.americanwinchesandhoists.com/>
>
>
http://www.northerntool.com/shop/tools/category_winches+ac-powered-winch
es
<http://www.northerntool.com/shop/tools/category_winches+ac-powered-winc
hes>
>
> http://www.google.com/search?hl=en&q=Fulton+Dutton+Winch&btnG=Search
<http://www.google.com/search?hl=en&q=Fulton+Dutton+Winch&btnG=Search>
>
> http://www2.northerntool.com/winches.htm
<http://www2.northerntool.com/winches.htm>
>
> http://www2.northerntool.com/product/200320251.htm
<http://www2.northerntool.com/product/200320251.htm>
>
> The first one has a product called "Lil Hercules" but it isn't for
outside
> use.
> My search isn't complete and I could use some good and specific ideas
> Terry / W1TR
>
> On 11/11/2010 7: 30 PM, Jon Pearl wrote:
> Hi Barrie.
>
> Think in terms of 'hoist'.
>
> Look here for some ideas that may help... http://w4abc.com/drive.html
<http://w4abc.com/drive.html>
>
>
>
> 73,
>
> Jon Pearl - W4ABC
>
> On 11/11/2010 5:08 PM, Barrie Smith wrote:
> > I recently put a Bencher Skyhawk atop a HG-52SS. At the moment, I'm
> using a
> hand-winch to raise and lower the tower. Since I'm lazy, I'd like to
> install an
> electric winch.
> >
> > The beam itself weighs 75 lbs. I have no idea what weight the
portion of
> the
> tower that rises and lowers represents.
> >
> > I'd rather go a little over-kill on the winch.
> >
> > Anyone have any suggestions as to what winch to buy?
> >
> > 73, Barrie, W7ALW
> > _______________________________________________
-snip-
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|