Towertalk
[Top] [All Lists]

Re: [TowerTalk] Conduit size?

To: "'Jim Miller'" <jim@jtmiller.com>, <TowerTalk@contesting.com>
Subject: Re: [TowerTalk] Conduit size?
From: "W0MU Mike Fatchett" <w0mu@w0mu.com>
Date: Mon, 17 May 2010 18:13:41 -0600
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
I would go bigger if you can.  The extra space makes it much easier to pull.



CC Packet Cluster W0MU-1
W0MU.NET or  67.40.148.194

"A slip of the foot you may soon recover, but a slip of the tongue you may
never get over." Ben Franklin 



-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of Jim Miller
Sent: Monday, May 17, 2010 5:44 PM
To: TowerTalk@contesting.com
Subject: [TowerTalk] Conduit size?

I'm planning to run about 70ft of conduit to service two RG213 (or Bury
Flex) runs and a single Channel Master 3 conductor control wire. It will be
a straight run with 90 degree sweeps at both ends.

I'm planning on moving from this house in 2 years and really don't plan on
investing more on antennas here so additional runs aren't really an issue.

Will 1.5" electrical PVC be adequate to handle this or do I need to go to
2"?

thanks

jim ab3cv
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>