I'm DEFINITELY going with a set of KF7P's curved standoffs. I think that's
my best protection against feed line entanglement, given the characteristics
of winds here.
There are lots of great ideas here, but pictures are great!
If there's not already a place to do this (with ads from the sponsors of
this list, hopefully!) I'd be happy to collect photos on this topic and put
them on one of my photo accounts for reference.
As some of you know, I'm in the mid-phase of a tower project - permit in
hand, base poured and getting the tower ready to stand up - and this list is
an INCREDIBLE resource.
Mickey N4MB
On Fri, Mar 25, 2011 at 12:17 AM, Robert Harmon <k6uj@pacbell.net> wrote:
> Jim,
>
> I have a US Tower HDX-589 and also use their standoffs. I like the
> idea of yours to use a 90 degree PVC sweep elbow on the top standoff.
> May do this myself.
> Do you have a picture showing this top standoff ? What size elbow did
> you use ?
>
>
> Mickey,
> I found another provider of tower standoffs for info.
> His standoffs use u-bolts for connection to the tower legs.
> http://www.kf7p.com/KF7P/CoaxArms.html
>
> Bob
> K6UJ
>
>
>
> On Mar 24, 2011, at 8:23 PM, Jim McDonald wrote:
>
> > On my US Tower HDX-589 I use factory coax standoff arms, with a 90-degree
> > PVC sweep on the top one arm to minimize strain from the weight of the
> > hanging cables.
> >
> > I use the US Tower inverted vee hanger just above the thrust bearing to
> > support an inverted vee. It mounts as a sleeve around the mast and is in
> > the UST catalog.
> >
> > I have used a short length of conduit attached to the top section with
> small
> > U-bolts to hold another inverted vee.
> >
> > I have a small aluminum bracket attached to the top of one leg of the top
> > section to attach a half-sloper.
> >
> > I also have a DX Engineering remote switch attached to another leg at the
> > top of the top section.
> >
> > It's essential, obviously, to be careful to keep the rotor loop of cables
> > going to the mast from snagging in that stuff.
> >
> > I took pictures from the ground with a telephoto lens recently if you
> want
> > me to send you any.
> >
> > Jim N7US
> >
> >
> >
> > -----Original Message-----
> >
> > I am finding it interesting to engineer a way way to attach things to a
> > crank up tower. It looks like the cable standoffs are done with small U
> > bolts. I'm considering having a light plate made to bolt to the outside
> of
> > the face with pulleys.
> >
> > How do you attach things (like wire antennae or standoffs) to your
> crank-up
> > tower?
> >
> > 73,
> >
> > Mickey N4MB
> >
> >
> > _______________________________________________
> >
> >
> >
> > _______________________________________________
> > TowerTalk mailing list
> > TowerTalk@contesting.com
> > http://lists.contesting.com/mailman/listinfo/towertalk
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
--
Mickey Baker
Fort Lauderdale, FL
“Tell me, and I will listen. Show me, and I will understand. Involve me, and
I will learn.” Teton Lakota, American Indian Saying.
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|